Back to Title and Contents
and then press the Power button to confirm
the selection.
5. Use the volume buttons to highlight the
correct update file on the Micro SD card, and
then press the Power button to confirm.
The Product opens the Updater, installs the
update, and then restarts with the update
installed. This process can take 5 to 10
minutes. When complete, the message
'Install from Micro SD card completed with
status 0.' should show on the install line.
6. Use the volume keys and Power button to
select reboot system now. Your unit should
boot normally.
Software Management
132
To Next Page
Loading...
