appears next to the MAC address on the About
screen and on relevant test result screens.
You can use this feature for tasks such as testing
ACL lists (for example, finding out if specific MAC
addresses are allowed on the network)or for
determining if specific IPv4 addresses should be
assigned to specific MAC addresses.
802.1X
Tap the toggle field to enable wired 802.1X
authentication in the current Profile. Enabling
this setting also enables an 802.1X test card on
the Wired AutoTest results screen.
The following settings appear when 802.1X
authentication is enabled. Enter all necessary
credentials, such as EAP type, username and
password, or certificate.
AutoTest App and Profiles
256
To Next Page
Loading...
Need help?
General
