FTP Server
Enter the IPv4 address or URL of the FTP server
you want to test. If you enter an IP address, the
DNS Lookup portion of the test is skipped.
IP Protocol Version
IPv4 is used by default. Tap the field to switch
between IPv4 and IPv6.
File
This setting specifies the path and name of the
file that is downloaded from (Get) or uploaded
to (Put) the server, based on the Direction
setting below. Tap the field to enter the file path
and name.
File Transfer Size
This setting lets you limit the amount of data to
be downloaded or uploaded. The default
transfer size is ALL.
l
When the Direction setting is Get, a transfer
size of ALL causes the download to continue
until the entire file is downloaded or the
Response Time Threshold is exceeded.
AutoTest App and Profiles
367