Specifying a transfer size that is greater than
file being retrieved does not cause the test to
fail. The test stops when the file has finished
downloading.
l
When the Direction setting is Put, the default
transfer size of ALL causes the Product to
create and upload a file that is 10MB.
Direction
Tap the toggle button to switch between a Get
(download the File from the server) or Put
(upload the File to the server) test.
l
If Direction is set to Get, the file is retrieved,
and the size and data rate are calculated.
This data is discarded as soon as it is down-
loaded and is not retained on the Product.
l
If Direction is set to Put, the File named
above is created on the FTP server. The size
of this file is determined by the File Transfer
Size setting. The file contains a text string
indicating that it was sent from the Product,
and the test string is repeated to produce the
set file size.
AutoTest App and Profiles
368
To Next Page
Loading...
Need help?
General
