configure the profile. Changed settings are auto-
matically applied.
When you finish configuring, tap the back button
to return to the profile.
Name
Tap the Name field to enter a custom name for
the profile. This name appears on the main
AutoTest screen profile card and the Air Quality
profile screen header.
Channel Scan Cycles
This setting designates the number of times all
of the channels should be scanned before
reporting the results. Tap the field to enter a
new value between 1 and 10.
AP Signal Level Threshold
This setting designates the minimum signal level
at which an AP must be measured to be counted
in Co-Channel and Adjacent Channel Inter-
ference measurements. Tap the field to select a
new value or enter a custom one.
AutoTest App and Profiles
385