netAlly ETHERSCOPE nXG User Manual

Grading
Use the grading threshold controls to adjust the
values that determine Warning/Fail results for
the corresponding utilization and co-channel
interference and adjacent channel meas-
urements. Tap each Warning or Failure field to
select a new value or enter a custom one. Each
threshold also has a toggle button that allows
you to disable grading based on that
measurement entirely.
Thresholds
Use the threshold controls to adjust the values
that determine Warning/Fail results for the cor-
responding utilization and co-channel inter-
ference and adjacent channel measurements.
Tap each Warning or Failure field to select a new
value or enter a custom one. Each threshold also
has a toggle button that allows you to disable
grading based on that measurement entirely.
By default, you can set thresholds for both
802.11 and non-802.11 Utilization.
AutoTest App and Profiles
386

netAlly ETHERSCOPE nXG Specifications

General

Wi-Fi	802.11 a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Display	7-inch touchscreen
Connectivity	Wi-Fi, USB, Ethernet
Protocols Supported	TCP, UDP, IPv4, IPv6
Protocols	Ethernet, Wi-Fi, DHCP, DNS, HTTP
Measurement Capabilities	Throughput, packet loss, latency, jitter
Cable Test	Wiremap, length
Discovery	Network devices, VLANs
Network Performance Tests	Throughput, packet loss, latency, jitter
Power	AC adapter or battery
Management	Web interface
Power over Ethernet (PoE)	IEEE 802.3af/at
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity	10% to 90% non-condensing