netAlly ETHERSCOPE nXG User Manual

Swipe down twice to open the full Quick
Settings Panel.
l
Touch and drag the slider control at the top
of the panel to adjust the screen's bright-
ness.
l
Tap an icon in the panel to enable or disable
the corresponding feature. For example, you
can turn the unit's Wi-Fi functions on or
off from the quick settings.
Home and System Interface
52

netAlly ETHERSCOPE nXG Specifications

General

Wi-Fi	802.11 a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Display	7-inch touchscreen
Connectivity	Wi-Fi, USB, Ethernet
Protocols Supported	TCP, UDP, IPv4, IPv6
Protocols	Ethernet, Wi-Fi, DHCP, DNS, HTTP
Measurement Capabilities	Throughput, packet loss, latency, jitter
Cable Test	Wiremap, length
Discovery	Network devices, VLANs
Network Performance Tests	Throughput, packet loss, latency, jitter
Power	AC adapter or battery
Management	Web interface
Power over Ethernet (PoE)	IEEE 802.3af/at
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity	10% to 90% non-condensing