netAlly ETHERSCOPE nXG User Manual

Under each category, the number of discovered
APs is shown for each characteristic. (In the
example above, there are (3) Security types
detected and (9) APs using the WPA2-P Security
type.)
In this example, the Overlap screen shows only
those APs that fall under your chosen filter
parameters.
Wi-Fi Analysis App
540

netAlly ETHERSCOPE nXG Specifications

General

Wi-Fi	802.11 a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Display	7-inch touchscreen
Connectivity	Wi-Fi, USB, Ethernet
Protocols Supported	TCP, UDP, IPv4, IPv6
Protocols	Ethernet, Wi-Fi, DHCP, DNS, HTTP
Measurement Capabilities	Throughput, packet loss, latency, jitter
Cable Test	Wiremap, length
Discovery	Network devices, VLANs
Network Performance Tests	Throughput, packet loss, latency, jitter
Power	AC adapter or battery
Management	Web interface
Power over Ethernet (PoE)	IEEE 802.3af/at
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity	10% to 90% non-condensing