the General Settings for the test apps,
accessed from the left-side navigation
drawer .) When finished, tap to return
to the Floor Plan menu.
Signal Propagation: Tap to enter a value for
the propagation radius for the survey sample
points.
Survey Mode
Tap Survey Mode to select the Wi-Fi data
collection method that best suits your Wi-Fi
environment and survey data collection require-
ments:
1. Current Scan (Passive)is the default and
preferred way to perform a survey. It allows
immediate data collection based on the
most recent APbeacon seen from each
BSSID. APBSSIDs age out after 140 seconds,
and Wi-Fi clients age-out after 4 minutes.
APBSSIDs age out after 30 seconds.
2. Scan Once (Passive)is more precise but
more time-consuming. When a point is
selected, all the BSSID information is
cleared, and the unit acquires a single scan
AirMapper™ App
649
To Next Page
Loading...
