Note: NetAlly does not recommend that you
change the band, channel, or dwell time settings
after you have started a survey. The survey
results for the multiple settings can create
confusing or less reliable results. If you wish to
do so and if the Override Bands and Channels
setting is enabled, you can use the AirMapper
Settings to make changes after you have started
your survey. If the Override Bands and Channels
setting is not enabled you must use the General
Settings to make changes.
Hidden SSIDs and APs
For any [Hidden] APs or SSIDs at your site that
you want detected during a survey, NetAlly
recommends creating and enabling a Wi-Fi
Profile in the AutoTest app, configured with the
appropriate credentials. Otherwise, AirMapper
detects the BSSIDs associated with hidden
devices but may not determine their APs/SSIDs.
AirMapper™ App
653
To Next Page
Loading...
Need help?
General
