netAlly ETHERSCOPE nXG User Manual

Note: Selecting a subset of channels and bands
lets you exclude scans of unneeded channels
from the survey. This improves survey
performance and reduces the amount of data
collected.
Changing Settings after Starting
You can reopen the AirMapper settings to
change the Floor Plan > Dimensions or Signal
Propagation size after starting your survey.
Existing data points are retained on the map
unless you select a different Floor Plan.
AirMapper™ App
652

netAlly ETHERSCOPE nXG Specifications

General

Wi-Fi	802.11 a/b/g/n/ac
Ethernet	10/100/1000 Mbps
Display	7-inch touchscreen
Connectivity	Wi-Fi, USB, Ethernet
Protocols Supported	TCP, UDP, IPv4, IPv6
Protocols	Ethernet, Wi-Fi, DHCP, DNS, HTTP
Measurement Capabilities	Throughput, packet loss, latency, jitter
Cable Test	Wiremap, length
Discovery	Network devices, VLANs
Network Performance Tests	Throughput, packet loss, latency, jitter
Power	AC adapter or battery
Management	Web interface
Power over Ethernet (PoE)	IEEE 802.3af/at
Operating Temperature	32°F to 122°F (0°C to 50°C)
Humidity	10% to 90% non-condensing