netAlly ETHERSCOPE nXG

above, a speed test is running on Channel 8.
l
The waterfall has two view types. Use
Current to detect instantaneous RF. To
smooth the data and see overall usage,
change the type to Average 5 Sweeps, which
averages five sweeps for each new line of
data. This decreases the data resolution but
may make the data easier to interpret in
highly active RFenvironments. (See
"Changing Spectrum Settings" on page678
for instructions on changing the type.)
Real Time View
The Real Time display shows the current values
across the frequency band with colorized lines
for the current measurement, the average
measurement, and the highest measured value
(Max-Hold).
Spectrum Test App
674