NETGEAR D6220 User Manual

5. Click the Edit button.
The previous figure shows one USB device attached to the modem router.
6. To specify a name that is used to access the USB device or devices that are connected to the modem
router, in the Network/Device Name field, enter a name.
By default, the name is readyshare.
7. To specify a name for the workgroup that the USB device or devices are members of, in the Workgroup
field, enter a name.
By default, the name is Workgroup.The name works only in an operating system that supports NetBIOS,
such as Microsoft Windows. If you are using a Windows workgroup rather than a domain, the workgroup
name is displayed here.
8. Enable or disable access methods by selecting or clearing the corresponding check boxes and specifying
access to the storage device as described in the following table.
Share a Storage Device Attached to the Modem Router
140
AC1200 WiFi VDSL/ADSL Modem Router Model D6220

NETGEAR D6220 Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	900 Mbit/s
Product type	Tabletop router
Product color	Black
Security algorithms	WPA, WPA2, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Power source type	AC
Routing protocols	IP
Antennas quantity	2
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	182 mm
Width	240 mm
Height	41 mm
Weight	341 g