NETGEAR D6220 User Manual

Your settings are saved.
10. Click the Close Window button.
The pop-up window closes.
Approve Storage Devices
For more security, you can set up the modem router to share only storage devices that you approve.
To allow only approved storage devices to connect to the modem router and specify which
storage devices are approved:
1. Make sure that the storage device or devices that you want to approve are attached to the modem
router.
2. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
3. Enter http://www.routerlogin.net.
A login window opens.
4. Enter the modem router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > USB Settings.
6. Select the No radio button.
By default the Yes radio button is selected.This setting lets you connect and access all your storage
devices.
7. Click the Apply button.
Your settings are saved.
8. Click the Approved Devices button.
Share a Storage Device Attached to the Modem Router
148
AC1200 WiFi VDSL/ADSL Modem Router Model D6220

NETGEAR D6220 Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	900 Mbit/s
Product type	Tabletop router
Product color	Black
Security algorithms	WPA, WPA2, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Power source type	AC
Routing protocols	IP
Antennas quantity	2
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	182 mm
Width	240 mm
Height	41 mm
Weight	341 g