Table 3. D6220 modem router factory default settings (Continued)
Default SettingFeature
2346Fragmentation length
2347CTS/RTS threshold
Long PreamblePreamble mode
WPS
EnabledWPS capability
Enabled; see the modem router web pages (select ADVANCED > Advanced
Setup > Wireless Settings)
Modem router’s PIN
EnabledKeep Existing Wireless
Settings
Technical Specifications
Table 4. D6220 modem router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPPoA, Dynamic DNS, UPnP, and SMBData and routing protocols
• North America: 120V, 60 Hz, input
• UK, Australia: 240V, 50 Hz, input
• Europe: 230V, 50 Hz, input
• All regions: 12V @ 2.5A output
Power adapter
240 x 182 x 41 mm (9.44 x 7.16 x 1.61 in.)Dimensions
341 g (0.75 lb)Weight
0° to 40°C (32º to 104ºF)Operating temperature
90% maximum relative humidity, noncondensingOperating humidity
• EN 55022:2010/AC:2011, Class B
• CISPR 22:2008, Class B
• AS/NZS CISPR 22:2009/Amdt 1:2010, Class B
Electromagnetic emissions
Four RJ-45 ports supporting 10BASE-T, 100BASE-TX, and 1000BASE-TLAN
Supplemental Information
264
AC1200 WiFi VDSL/ADSL Modem Router Model D6220
To Next Page
Loading...
