NETGEAR D6220 User Manual

Table 3. D6220 modem router factory default settings (Continued)
Default SettingFeature
Main WiFi network
EnabledWiFi communication
See product labelSSID name
WPA2-PSK (AES)Security
See product labelWiFi passphrase
• North America: United States
• Europe: Europe
• Other continents: Varies by region
Country/region
Auto.The available channels depend on the region.RF channel
Auto
Throughput can vary. Network conditions and
environmental factors, including volume of network
traffic, building materials and construction, and network
overhead, affect the data throughput rate.
Note
Transmission speed
• Up to 300 Mbps at 2.4 GHz
• Up to 867 Mbps at 5 GHz
WiFi operating mode
Guest WiFi network
DisabledWiFi communication
• 2.4 GHz band: NETGEAR-Guest
• 5 GHz band: NETGEAR-5G-Guest
SSID name
None (open network)Security
DisabledAllow guests to access main
network
General WiFi settings
100%, nonconfigurableRadio transmission power
Enabled20/40 MHz coexistence
Supplemental Information
263
AC1200 WiFi VDSL/ADSL Modem Router Model D6220

NETGEAR D6220 Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	900 Mbit/s
Product type	Tabletop router
Product color	Black
Security algorithms	WPA, WPA2, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Power source type	AC
Routing protocols	IP
Antennas quantity	2
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	182 mm
Width	240 mm
Height	41 mm
Weight	341 g