EasyManuals Logo

NETGEAR D6220 User Manual

NETGEAR D6220
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #198 background imageLoading...
Page #198 background image
6. Select two security questions and provide answers to them.
7. Click the Apply button.
Your settings are saved.
Recover the admin Password
We recommend that you enable password recovery if you change the password for the modem router user
name admin.Then you can recover the password if it is forgotten.This recovery process is supported in
Internet Explorer, Firefox, and Chrome browsers, but not in the Safari browser. For information about setting
up password recovery, see Set Up Password Recovery on page 197.
The following procedure works only if you did set up password recovery.The recovery process is supported
in Internet Explorer, Firefox, and Chrome browsers, but not in the Safari browser.
To recover your password:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2. Enter www.routerlogin.net.
A login window opens.
3. Click the Cancel button.
If password recovery is enabled, you are prompted to enter the serial number of the modem router.The
serial number is on the product label of the modem router.
4. Enter the serial number of the modem router.
5. Click the Continue button.
A page displays requesting the answers to your security questions.
6. Enter the saved answers to your security questions.
7. Click the Continue button.
A page displays your recovered password.
8. Click the Login again button.
A login window opens.
9. With your recovered password, log in to the modem router.
Return the Modem Router to Its Factory Default Settings
Under some circumstances (for example, if you lost track of the changes that you made to the modem router
settings or you move the modem router to a different network), you might want to erase the configuration
and reset the modem router to factory default settings.
If you do not know the current IP address of the modem router, first try to use an IP scanner application to
detect the IP address before you reset the modem router to factory default settings.
To reset the modem router to factory default settings, you can use either the Reset button on the back of
the modem router or the Erase function. However, if you cannot find the IP address or lost the password to
access the modem router, you must use the Reset button.
Manage the Modem Router and Monitor the Traffic
198
AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Table of Contents

Other manuals for NETGEAR D6220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR D6220 and is the answer not in the manual?

NETGEAR D6220 Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
SIM card slotNo
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)900 Mbit/s
Product typeTabletop router
Product colorBlack
Security algorithmsWPA, WPA2, WPA2-PSK
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11ac
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports5
Power source typeAC
Routing protocolsIP
Antennas quantity2
Cables includedLAN (RJ-45), Phone (RJ-11)
Weight and Dimensions IconWeight and Dimensions
Depth182 mm
Width240 mm
Height41 mm
Weight341 g

Related product manuals