EasyManuals Logo

NETGEAR D6220 User Manual

NETGEAR D6220
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
DescriptionAccess Method
Enabled by default.You can type \\readyshare to access the storage device within
your network. If you change the name in the Network/Device Name field from
readyshare to another name, the link changes accordingly.
Network Connection
Enabled by default.You can type http://readyshare.routerlogin.net/shares to access
the USB device within your network and download or upload files. In this URL,
readyshare is the name that is specified in the Network/Device Name field. If you
change the name in the Network/Device Name field from readyshare to another
name, the link changes accordingly.
You can also click the link that is shown in the Link column.The fixed port is number
is 80.
HTTP
Disabled by default. If you enable this feature, remote users can type https://<public
IP address>/shares to access the USB device over the Internet. <public IP address>
is the external or public IP address that is assigned to the modem router (for example,
1.1.10.102).
This feature supports file uploading only. The default port is number 443, which you
can change.
HTTPS (via internet)
Enabled by default.You can type ftp://readyshare.routerlogin.net/shares to access
the USB device within your network and download or upload files. In this URL,
readyshare is the name that is specified in the Network/Device Name field. If you
change the name in the Network/Device Name field from readyshare to another
name, the link changes accordingly.
You can also click the link that is shown in the Link column.The fixed port is number
is 21.
FTP
Disabled by default. If you enable this feature, remote users can type ftp://<public IP
address>/shares to access the USB device over the Internet and download or upload
files. <public IP address> is the external or public IP address that is assigned to the
modem router (for example, 1.1.10.102).
The default port is number 21, which you can change.
If you set up Dynamic DNS (see Set Up and Manage Dynamic DNS on page 152),
you can also type a URL domain name. For example, if your domain name is MyName
and you use the NETGEAR DDNS server, you can type
ftp://MyName.mynetgear.com to access the USB device over the Internet and
download or upload files.
FTP (via internet)
9. Click the Apply button.
Your settings are saved.
Enable FTP Access Within Your Network
File Transfer Protocol (FTP) lets you download (receive) and upload (send) large files faster.
For information about using FTP to access a storage device over the Internet, see
Manage Dynamic DNS and Access Storage Devices Through the Internet on page
151.
Note
Share a Storage Device Attached to the Modem Router
141
AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Table of Contents

Other manuals for NETGEAR D6220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR D6220 and is the answer not in the manual?

NETGEAR D6220 Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
SIM card slotNo
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)900 Mbit/s
Product typeTabletop router
Product colorBlack
Security algorithmsWPA, WPA2, WPA2-PSK
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11ac
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports5
Power source typeAC
Routing protocolsIP
Antennas quantity2
Cables includedLAN (RJ-45), Phone (RJ-11)
Weight and Dimensions IconWeight and Dimensions
Depth182 mm
Width240 mm
Height41 mm
Weight341 g

Related product manuals