NETGEAR D6220 User Manual

Change the NETGEAR USB Control Center Language
To change the language:
1.
Click the NETGEAR USB Control Center icon .
The main page displays.
2. Select Tools > Configuration.
The Control Center - Configuration page displays.
3. From the Language menu, select a language.
4. Click the OK button.
The next time the NETGEAR USB Control Center starts, the language changes.
Specify the Time-Out
To specify the time-out:
1.
Click the NETGEAR USB Control Center icon .
The main page displays.
2. Select Tools > Configuration.
The Control Center - Configuration page displays.
3. In the Timeout field, type the number of minutes.
The time-out is the number of minutes that a computer holds its connection to the printer when the
connection is not being used.
4. Click the OK button.
The Control Center - Configuration page displays.
Share a USB Printer
171
AC1200 WiFi VDSL/ADSL Modem Router Model D6220

NETGEAR D6220 Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	900 Mbit/s
Product type	Tabletop router
Product color	Black
Security algorithms	WPA, WPA2, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Power source type	AC
Routing protocols	IP
Antennas quantity	2
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	182 mm
Width	240 mm
Height	41 mm
Weight	341 g