Name: NETGEAR D6220
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Manage the Modem Router Remotely

The remote management feature lets you access your modem router securely over the Internet to view or

change its settings.You must know the modem router’s WAN IP address to use this feature.

For information about a different type of remote access, that is, remote access using Dynamic DNS, see

Access Storage Devices Through the Internet on page 155.

Be sure to change the password for the user name admin to a secure password.The

ideal password contains no dictionary words from any language and contains

uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.

See Change the admin Password on page 196.

Note

To set up remote management:

1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the modem router user name and password.

The user name is admin.The default password is password.The user name and password are

case-sensitive.

The BASIC Home page displays.

4. Select ADVANCED > Advanced Setup > Remote Management.

5. Select the Turn Remote Management On check box.

6. In the Allow Remote Access By section, specify the external IP addresses to be allowed to access the

modem router’s remote management.

For enhanced security, restrict access to as few external IP addresses as practical.Note

Manage the Modem Router and Monitor the Traffic

218

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

NETGEAR D6220 Specifications

General