Name: NETGEAR D6220
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

The user name is admin.The default password is password.The user name and password are

case-sensitive.

The BASIC Home page displays.

4. Select ADVANCED > Advanced Setup > Traffic Meter.

5. Select the Enable Traffic Meter check box.

By default, no traffic limit is specified and the traffic volume is not controlled.

6. In the Traffic Counter section, set the traffic counter to begin at a specific time and date.

7. To start the traffic counter immediately, click the Restart Counter Now button.

8. Click the Apply button.

Your settings are saved and the modem router restarts.

The Internet Traffic Statistics section helps you to monitor the data traffic. For more information, see

View the Internet Traffic Volume and Statistics on page 213.

View the Internet Traffic Volume and Statistics

If you enabled the traffic meter (see Start the Traffic Meter Without Traffic Volume Restrictions on page 212),

you can view the Internet traffic volume and statistics.

To view the Internet traffic volume and statistics of the traffic meter:

1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the modem router user name and password.

Manage the Modem Router and Monitor the Traffic

213

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Other manuals for NETGEAR D6220

Questions and Answers:

Need help?

Do you have a question about the NETGEAR D6220 and is the answer not in the manual?

General