NETGEAR D6220 User Manual

Factory Settings
You can reset the modem router to the factory default settings, which are shown in the following table.
For more information about resetting the modem router to its factory settings, see Return the Modem Router
to Its Factory Default Settings on page 198.
Table 3. D6220 modem router factory default settings
Default SettingFeature
Router login
www.routerlogin.net (or www.routerlogin.com or 192.168.0.1)User login URL
adminUser name (case-sensitive)
passwordLogin password
(case-sensitive)
Internet connection
Use default hardware addressWAN MAC address
Determined by the protocol that is used for the Internet connection (see
MTU Concepts on page 81)
WAN MTU size
AutosensingPort speed
Local network (LAN)
192.168.0.1LAN IP address
255.255.255.0Subnet mask
EnabledDHCP server
192.168.0.2 to 192.168.0.254DHCP range
192.168.0.2DHCP starting IP address
192.168.0.254DHCP ending IP address
DisabledDMZ
• North America: Pacific Standard Time
• Europe: GMT
• Other continents: Varies by region
Time zone
EnabledTime adjusted for daylight
saving time
Supplemental Information
262
AC1200 WiFi VDSL/ADSL Modem Router Model D6220

NETGEAR D6220 Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	900 Mbit/s
Product type	Tabletop router
Product color	Black
Security algorithms	WPA, WPA2, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Power source type	AC
Routing protocols	IP
Antennas quantity	2
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	182 mm
Width	240 mm
Height	41 mm
Weight	341 g