Name: NETGEAR D6220
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

To back up your Windows computer:

1. Connect a USB storage device to the modem router’s USB port.

2. If your USB device uses a power supply, connect it.

You must use the power supply when you connect the USB device to the modem router.

When you connect the storage device to the modem router’s port, it might take up to two minutes before

it is ready for sharing. By default, the device is available to all computers on your local area network

(LAN).

3. Download ReadySHARE Vault from netgear.com/readyshare and install it on each Windows computer.

4. Launch ReadySHARE Vault.

5. Use the dashboard or the Backup tab to set up and run your backup.

Manage Access to a Storage Device

You can specify the device name, workgroups, and network folders for a storage device connected to the

USB port on the modem router.

To specify the storage device access settings:

1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the modem router user name and password.

The user name is admin.The default password is password.The user name and password are

case-sensitive.

The BASIC Home page displays.

4. Select ReadySHARE.

The USB Storage (Basic Settings) page displays. By default, the Basic radio button is selected.

Share a Storage Device Attached to the Modem Router

139

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Other manuals for NETGEAR D6220

Questions and Answers:

Need help?

Do you have a question about the NETGEAR D6220 and is the answer not in the manual?

General