Name: NETGEAR D6220
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

If your ISP supports two virtual interfaces (one Internet virtual interface and one IPTV

virtual interface), before you specify the settings for the IPTV interface, first use the

following procedure to specify the settings for the Internet interface. Then repeat the

procedure to specify the settings for the IPTV interface.While doing so, follow the

directions that your ISP gave you.

Note

To view or specify the settings for a VDSL Internet connection that does not require a login:

1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.

2. Enter http://www.routerlogin.net.

A login window opens.

3. Enter the modem router user name and password.

The user name is admin.The default password is password.The user name and password are

case-sensitive.

The BASIC Home page displays.

4. Select Internet.

The Internet Setup page displays.

5. From the Select Country menu, select the country in which you use the modem router.

The Select Country menu is not available in all countries and might be masked out.

6. From the Select Internet Service Provider menu, select the Internet service provider (ISP) that you

are using.

If your ISP is not in the menu, select Other.

7. From the Transfer Mode menu, select PTM.

When you select PTM from the Transfer Mode menu, the only option in the DSL Mode menu is VDSL2.

8. From the menu above the Enable This Interface check box, select the virtual interface that you are

configuring.

• Internet. In all situations, the Internet virtual interface is the one that you must configure first.The

IPTV virtual interface applies only to a few ISPs. In most situations you can ignore the IPTV virtual

interface.

• IPTV. For some ISPs, you must configure the IPTV virtual interface in addition to the Internet virtual

interface. However, first specify the settings for the Internet virtual interface (which is the default

interface) before you repeat the procedure to specify the settings for the IPTV virtual interface.

9. Make sure that the Enable This Interface check box is selected for the interface that you are configuring.

Clear the Enable This Interface check box only if you want to configure the virtual interface but not

enable it.

10. Scroll down to the Does your Internet connection require a login? section and select the No radio button.

Manage the Internet Settings Manually

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Other manuals for NETGEAR D6220

Questions and Answers:

Need help?

Do you have a question about the NETGEAR D6220 and is the answer not in the manual?

General