NETGEAR D6220 User Manual

(Continued)
DescriptionField
Enter the service name that you use to log in to your Internet service, as indicated by
your ISP.
Often, a service name is not required.
Service Name (If Required)
(PPPoE only)
Select how the Internet connection functions:
• Always On. Once the Internet connection is established, it remains active.This is
the default setting.
• Dial on Demand. When someone attempts to connect to the Internet, the Internet
connection is established.When the idle time-out period expires, the Internet
connection is terminated.
• Manually Connect.You must connect to the Internet manually (see View, Establish,
or Terminate the PPPoE or PPPoA Internet Connection on page 209).
Connection Mode
If you select Dial on Demand from the Connection Mode menu, enter the idle time-out
period in minutes.
The idle time-out specifies how long the modem router keeps the Internet connection
active when no one on the network is using the Internet connection. The default is 5
minutes.To disable the idle time-out, enter 0. (When you disable the idle time-out, the
connection is not terminated automatically.)
Idle Timeout (In Minutes)
Internet IP Address
Your ISP uses DHCP to assign your IP address.Your ISP automatically assigns these
addresses.
Get Dynamically from ISP
Enter the IP address, IP subnet mask, and gateway IP address that your ISP assigned
you for static IP address service.The gateway is the ISP router to which your modem
router connects.
Use Static IP Address
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Your ISP uses DHCP to assign your DNS servers.Your ISP automatically assigns this
address.
Get Automatically from ISP
If you know that your ISP does not automatically transmit DNS addresses to the modem
router during login, select this option and enter the IP address of your ISP primary DNS
server. If a secondary DNS server address is available, enter it also.
Use These DNS Servers
NAT (Network Address Translation)
NAT allows computers on your home network to share the modem router Internet connection. NAT is enabled by default
because it is required in most situations.
NAT is enabled.This is the default setting. Leave this setting if no reason to disable NAT
exists.
Enable
NAT is disabled.Disable
Manage the Internet Settings Manually
68
AC1200 WiFi VDSL/ADSL Modem Router Model D6220

NETGEAR D6220 Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	900 Mbit/s
Product type	Tabletop router
Product color	Black
Security algorithms	WPA, WPA2, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Power source type	AC
Routing protocols	IP
Antennas quantity	2
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	182 mm
Width	240 mm
Height	41 mm
Weight	341 g