NETGEAR D6220 User Manual

4. Select Wireless.
5. View or change the basic WiFi settings and security settings.
The following table describes the fields on the Wireless Setup page.
DescriptionField
Region Selection
From the menu, select the region in which the modem router operates.
It might not be legal to operate the modem router in a region other than
the regions listed in the menu. If your country or region is not listed,
check with your local government agency.
Note
Region
Wireless Network (2.4GHz b/g/n)
By default, the modem router broadcasts its SSID so that WiFi stations can detect the
WiFi name (SSID) in their scanned network lists.To turn off the SSID broadcast, clear
the Enable SSID Broadcast check box.Turning off the SSID broadcast provides
additional WiFi security, but users must know the SSID to be able to join the WiFi network
of the modem router.
Enable SSID Broadcast
Manage the Basic WiFi Network Settings
86
AC1200 WiFi VDSL/ADSL Modem Router Model D6220

NETGEAR D6220 Specifications

General

DSL WAN	-
Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	900 Mbit/s
Product type	Tabletop router
Product color	Black
Security algorithms	WPA, WPA2, WPA2-PSK
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11ac
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	5
Power source type	AC
Routing protocols	IP
Antennas quantity	2
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	182 mm
Width	240 mm
Height	41 mm
Weight	341 g