Name: NETGEAR D6220
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

(Continued)

DescriptionField

From the Channel menu, select an individual channel.The default channel depends on

your selection from the Region menu.

In some regions, not all channels are available. Do not change the

channel unless you experience interference (shown by lost connections

or slow data transfers). If this situation occurs, experiment with different

channels to see which is the best.

Note

If you use multiple WiFi access points (APs), reduce interference by

selecting different channels for adjacent APs.We recommend a channel

spacing of four channels between adjacent APs.

Note

Channel

From the Mode menu, select one of the following modes:

• Up to 173 Mbps. Legacy mode.This mode allows 802.11ac, 802.11n, and 802.11a

devices to join the network but limits 802.11ac and 802.11n devices to functioning

at up to 173 Mbps.

• Up to 400 Mbps. Neighbor-friendly mode for reduced interference with neighboring

WiFi networks.This mode allows 802.11ac, 802.11n, and 802.11a devices to join

the network but limits 802.11ac devices to functioning at up to 400 Mbps.

• Up to 867 Mbps. Performance mode.This mode allows 802.11ac, 802.11n, and

802.11a devices to join the network and allows 802.11ac devices to function at up

to 867 Mbps.This mode is the default mode.

Mode

Manage the Basic WiFi Network Settings

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Other manuals for NETGEAR D6220

Questions and Answers:

Need help?

Do you have a question about the NETGEAR D6220 and is the answer not in the manual?

General