NETGEAR M4100 Series User Manual

19
2
2. Configure System Information
This chapter covers the following topics:
• System Configuration
• Configure Initial Management VLAN Settings
• Define System Information
• View the Switch Status
• Manage Loopback Interfaces
• View the IPv6 Network Neighbor Table
• Configure an IPv4 Management VLAN
• View or Set the System Time
• Configure DNS
• Configure the DHCP Server
• Configure the DHCP Pool
• Configure UDP Relay Global Settings
• Configure the Basic PoE Settings
• Configure Advanced PoE Settings
• View All MIBs Supported by the Switch
• Configure SNMP v3 Settings for a User
• LLDP Overview
• ISDP Settings Overview
• Configure Timers

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply