Configure System Information
57
M4100 Series Managed Switch
View the Port Green Mode EEE History
To view the port green mode EEE history:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System
Management Green Ethernet Green Ethernet LPI History.
8. Select the Interface check box.
9. Specify the Sampling Interval.
Energy Detect Admin Mode Enable or Disable Energy Detect Mode on the port. When this mode is
enabled, when the port link is down, the PHY automatically goes down
for short period of time, and then wakes up to check link pulses. This
allows autonegotiation to be performed power saving consumption
when no link partner is present.
Energy Detect Operational Status Current operational status of the Energy Detect mode.
Table 14. Green Mode Statistics Summary (continued)
Field Description
To Next Page
Loading...
Need help?
General
