Configure Quality of Service
254
M4100 Series Managed Switch
• Destination L4 Port. This lists the keywords for the known destination Layer 4 ports
from which one can be selected. The list includes other as an option for the unnamed
ports.
• Flow Label. This is a 20-bit number that is unique to an IPv6 packet, used by end
stations to signify Quality of Service handling in routers. Flow Label can be specified
in the range of 0 to 1048575.
• IP DSCP. This lists the keywords for the known DSCP values from which one can be
selected. The list includes other as an option for the remaining values.
Match Criteria. Displays the configured match criteria for the specified class.
Values. Displays the values of the configured match criteria.
11. Click the APPLY button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Configure DiffServ Policy
You can associate a collection of classes with one or more policy statements. After creating a
policy, you can click the policy link to display the Policy screen.
To configure a DiffServ policy:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
To Next Page
Loading...
Need help?
General
