NETGEAR M4100 Series - Control DHCP Snooping Settings; Configure Global DHCP Snooping Settings

Manage Device Security
330
M4100 Series Managed Switch
Control DHCP Snooping Settings
You can configure the DHCP snooping settings.
Configure Global DHCP Snooping Settings
 To configure global DHCP snooping settings:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser
.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select Security
 Control > DHCP Snooping  Global Configuration.
8. Use DHCP Snooping Mode to enable or disable the DHCP snooping feature.
The factory default is disabled.
Unicast Storm Recovery Level Type Specify the unicast storm recovery level as a percentage of link speed or
as packets per second.
Unicast Storm Recovery Level Specify the threshold at which storm control activates. The factory
default is 5 percent of port speed for pps type.
Table 89. Storm control interface configuration
Field Description