Maintenance
417
M4100 Series Managed Switch
• Image2. Specify the code image2 to retrieve.
10. If you are downloading an image (Archive), select the image on the switch to overwrite.
This field is visible only when Archive is selected as the File Type.
Note: NETGEAR recommends that you not overwrite the active image. The
system displays a warning that you are trying to overwrite the active
image.
11. Click BROWSE to open a file upload window to locate the file to download.
12. Use Select File to browse and select the name and the path for the file to download.
You can enter up to 80 characters. The factory default is blank.
13. Click the APPLY button.
The download starts.
The Download Status field displays the status during transfer file to the switch.
Note: After a file transfer is started, wait until the screen refreshes. When
the screen refreshes, the Select File option is blanked out. This
indicates that the file transfer is done.
Download a File to a USB Device
To download a file to a USB device:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
To Next Page
Loading...
Need help?
General
