NETGEAR M4100 Series User Manual

Configure Switching Information
131
M4100 Series Managed Switch
9. Use VLAN ID to specify a VLAN ID in the range of 1 to 4093.
10. To add a MAC address to VLAN mapping, click the ADD button.
11. To delete a MAC address to VLAN mapping, click the DELETE button.
Configure a Protocol-Based VLAN Group
You can use a protocol-based VLAN to define filtering criteria for untagged packets. By
default, if you do not configure any port- (IEEE 802.1Q) or protocol-based VLANs, untagged
packets are assigned to VLAN 1. You can override this behavior by defining either port-based
VLANs or protocol-based VLANs, or both. Tagged packets are always handled according to
the IEEE 802.1Q standard, and are not included in protocol-based VLANs.
If you assign a port to a protocol-based VLAN for a specific protocol, untagged frames
received on that port for that protocol are assigned the protocol-based VLAN ID. Untagged
frames received on the port for other protocols are assigned the Port VLAN ID, either the
default PVID (1) or a PVID that you specifically assigned to the port using the Port VLAN
Configuration screen.
You define a protocol-based VLAN by creating a group. Each group has a one-to-one
relationship with a VLAN ID, can include one to three protocol definitions, and can include
multiple ports. When you create a group, you choose a name and a Group ID is assigned
automatically.
 To configure a protocol-based VLAN group:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply