NETGEAR M4100 Series User Manual

Configure System Information
32
M4100 Series Managed Switch
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Management > USB Device Information.
8. Click the REFRESH button to refresh the screen with the latest information.
The following table describes USB Device Details information.
Table 6. USB device Information
Field Description
Device Status The current status of device. Active if the device is USB plugged in and
recognized by the switch. Inactive if the device is not mounted. Invalid if
the device is not present or invalid device is plugged in.
Manufacturer The USB flash drive device manufacturer.
Serial Number The USB flash drive device serial number.
USB Version Compliance The USB flash drive device version.
Class Code The USB flash drive device class.
USB Device Details
Subclass Code The USB flash drive device subclass.
Protocol The USB flash drive device protocol.
Vendor ID The USB flash drive device vendor ID.

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply