Configure System Information
46
M4100 Series Managed Switch
7. Select System Management Time Summer Time Configuration.
8. Select a Summer Time radio button:
• Disable.
This option is used to disable Summer Time.
• Recurring.
This option is used to enable Recurring Summer Time.
• Recurring EU.
This option is used to enable Recurring EU Summer Time.
• Recurring USA.
This option is used to enable Recurring USA Summer Time.
• Non Recurring.
This option is used to configure Non Recurring Summer Time.
The fields described in the following table are visible only when Summer Time is Recurring or
Recurring EU or Recurring USA.
Table 10. Summer Time Recurring configuration
Field Description
Begins At The fields under this are used to configure the Start values for the date
and time.
• W
eek. This field is used to configure the start week.
• Day
. This field is used to configure start day.
• Month. This
field is used to configure start month.
• Hours.
This field is used to configure start hours.
• Minutes. This
field is used to configure start minutes.
Ends At The fields under this are used to configure the End values for the date
and time.
• W
eek. This field is used to configure the end week.
• Day
. This field is used to configure end day.
• Month.
This field is used to configure end month.
• Hours.
This field is used to configure end hours.
• Minutes.
This field is used to configure end minutes.
Offset This field is used to configure the recurring offset.
Zone This field is used to configure the Zone.
To Next Page
Loading...
Need help?
General
