NETGEAR M4100 Series User Manual

Configure System Information
65
M4100 Series Managed Switch
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
7. Select System > Services > DHCP Server > DHCP Server Statistics.
The following table describes the DHCP Server Statistics fields.
Table 17. DHCP server statistics
Field Description
Automatic Bindings Specifies the number of Automatic Bindings on the DHCP server.
Expired Bindings Specifies the number of Expired Bindings on the DHCP server.
Malformed Messages Specifies the number of the malformed messages.
DHCPDISCOVER Specifies the number of DHCPDISCOVER messages received by the
DHCP server
.
DHCPREQUEST Specifies the number of DHCPREQUEST messages received by the
DHCP server
.
DHCPDECLINE Specifies the number of DHCPDECLINE messages received by the
DHCP server
.
DHCPRELEASE Specifies the number of DHCPRELEASE messages received by the
DHCP server
.
DHCPINFORM Specifies the number of DHCPINFORM messages received by the
DHCP server
.
DHCPOFFER Specifies the number of DHCPOFFER messages sent by the DHCP
server
.

NETGEAR M4100 Series Specifications

General

Model	M4100 Series
Switch Type	Managed
Form Factor	Rack-mountable
Port Configuration	24 or 48 ports
Ethernet Ports	10/100/1000 Mbps
PoE Support	Available on some models (PoE and PoE+)
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
QoS	Yes
Stackable	Yes
Ports	24 or 48
Jumbo Frame Support	Yes
Security Features	ACL, 802.1X, RADIUS, TACACS+
Operating Temperature	0° to 50° C (32° to 122° F)
Storage Temperature	-20° to 70° C (-4° to 158° F)
Power Supply	Internal power supply