Nidec H300 - Analog Value Objects

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media Card
Operation
Building
Automation
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
HVAC Drive H300 183
Issue Number: 3
Table 10-20 Analog value objects
Object ID
(AVn)
Object name Description
Present value access
mode
1 Drive parameter The drive parameter to read/write RW
2 Parameter value The new value for the parameter, or the value read from the parameter RW
3 Parameter read/write Whether the parameter should be read or written (1 = write, 2 = read) RW
4 Speed reference
The required output frequency/speed reference (Pr 01.021)
C
5 Maximum speed reference
The maximum reference clamp value (Pr 01.006)
RW
6 Output current
Motor output current magnitude
(Pr
04.001)
RO
7 Output torque
Motor output torque (Pr 04.020) as a percentage of full load
RO
8 Output frequency
Drive output frequency
(Pr 05.001)
RO
9 Output speed
Motor speed (Pr 05.004)
RO
10 Output power
Drive output power (Pr 05.003)
RO
11 Drive status word
Drive status word (Pr 10.040)
RO
12 User trip parameter
User trip (Pr 10.38)
RW
13 Last trip
Last drive trip (Pr 10.020)
RO
14 Filter change (dt)
Time between filter changes
(Pr
06.021)
RW
15 Time to next filter change
Time before filter change due
(Pr
06.023)
RO
16 Energy meter (MWH)
Energy meter (MWh) (Pr 06.025)
RO
17 Energy meter (KWH)
Energy meter (kWh) (Pr 06.026)
RO
18 PID 1 digital reference
Digital reference for PID 1
(Pr 14.025)
C
19 PID 1 digital feedback
Digital feedback for PID 1 (Pr 14.026)
C
20 PID 1 reference
Sum of all reference inputs to PID 1 (Pr 14.020)
RO
21 PID 1 feedback
Sum of all feedback inputs to PID 1 (Pr 14.021)
RO
22 PID 1 output
The output from PID 1 (Pr 14.001)
RO
23 PID 2 digital reference
Digital reference for PID 2
(Pr 14.055)
C
24 PID 2 digital feedback
Digital feedback for PID 2 (Pr 14.056)
C
25 PID 2 reference
Sum of all reference inputs to PID 2 (Pr 14.050)
RO
26 PID 2 feedback
Sum of all feedback inputs to PID 2 (Pr 14.051)
RO
27 PID 2 output
The output from PID 2 (Pr 14.031)
RO
28 Universal parameter access
User selectable parameter 1
(Pr 29.010)
RW/RO/C
29 Universal parameter access
User selectable parameter 2
(Pr 29.011)
RW/RO/C
30 Universal parameter access
User selectable parameter 3
(Pr 29.012)
RW/RO/C
31 Universal parameter access
User selectable parameter 4
(Pr 29.013)
RW/RO/C
32 Universal parameter access
User selectable parameter 5
(Pr 29.014)
RW/RO/C
33 Universal parameter access
User selectable parameter 6
(Pr 29.015)
RW/RO/C
34 Universal parameter access
User selectable parameter 7
(Pr 29.016)
RW/RO/C
35 Universal parameter access
User selectable parameter 8
(Pr 29.017)
RW/RO/C
36 Universal parameter access
User selectable parameter 9
(Pr 29.018)
RW/RO/C
37 Universal parameter access
User selectable parameter 10
(Pr 29.019)
RW/RO/C