Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media Card
Operation
Building
Automation
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
HVAC Drive H300 21
Issue Number: 3
Table 2-7 Keypad identification
Table 2-8 Additional options
Table 2-6 Option module identification
Type
Option
module
Color Name Further Details
Fieldbus
N/A KI-485 Adaptor
485 Comms Adaptor
485 Comms adaptor provides EIA-485 communication interface. This adaptor
supports 115 k Baud, node addresses between 1 to 16 and 8 1 NP M serial
mode.
Purple SI-PROFIBUS
Profibus option
PROFIBUS adapter for communications with the drive
Medium Grey SI-DeviceNet
DeviceNet option
DeviceNet adapter for communications with the drive
Light Grey SI-CANopen
CANopen option
CANopen adapter for communications with the drive
Beige SI-Ethernet
External Ethernet module that supports EtherNet/IP, Modbus TCP/IP and
RTMoE. The module can be used to provide high speed drive access, global
connectivity and integration with IT network technologies, such as wireless
networking
Yellow Green SI-PROFINET V2
PROFINET V2 option
PROFINET V2 adapter for communications with the drive
Automation
(I/O expansion)
Orange SI-I/O
Extended I/O
Increases the I/O capability by adding the following combinations:
• Digital I/O
• Digital Inputs
• Analog Inputs (differential or single ended)
• Analog Output
• Relays
Automation
(Applications)
Moss Green MCi200
Machine Control Studio Compatible Applications Processor
2nd processor for running pre-defined and/or customer created application
software.
Moss Green MCi210
Machine Control Studio Compatible Applications Processor (with Ethernet
communications)
2nd processor for running pre-defined and/or customer created application
software with Ethernet communications.
Black
SI-Applications
Plus
SyPTPro Compatible Applications Processor (with CTNet)
2nd processor for running pre-defined and/or customer created application
software with CTNet support (can only be used on Slot 3).
Type Keypad Name Further Details
Keypad
KI-HOA Keypad RTC
LCD keypad option
Keypad with a LCD display and Hand / Off / Auto buttons and RTC
HOA Remote keypad
Remote LCD keypad option
Remotely mounted keypad with an LCD display, Hand / Off / Auto buttons and real time clock
Type Option Name Further Details
Back-up
SD Card Adaptor
SD Card Adaptor
Allows the drive to use an SD card for drive back-up
SMARTCARD
SMARTCARD
Used for parameter back-up with the drive
To Next Page
Loading...
