Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media Card
Operation
Building
Automation
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
HVAC Drive H300 69
Issue Number: 3
3.13.3 Size 6 heatsink fan removal procedure
Figure 3-59 Removal of the size 6 heatsink fan
A: Press the tabs (1) inwards to release the fan assembly from the underside of the drive.
B: Use the tabs (1) to withdraw the fan by pulling it away from the drive.
C: Depress and hold the locking release on the fan cable lead as shown (2).
D: With the locking release depressed (2), take hold of the fan supply cable and carefully pull to separate the connectors.
Table 3-24 Size 6 heatsink fan part number
Model Heatsink fan part number
Size 6 3251-0030
To Next Page
Loading...
