Nidec H300 - Nameplate Description

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media Card
Operation
Building
Automation
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
HVAC Drive H300 19
Issue Number: 3
2.7 Nameplate description
See Figure 2-3 for location of rating labels.
Figure 2-5 Typical drive rating labels
* This label is only applicable to Size 7 and above.
Refer to Figure 2-2 Model number on page 12 for further information relating to the labels.
Date code format
The date code is four numbers. The first two numbers indicate the year and the remaining numbers indicate the week of the year in which the drive
was built.
Example:
A date code of 1710 would correspond to week 10 of year 2017.
Refer to
User Guide
Model
Frame
size
Voltage
Normal Duty
current rating
Drive format
H300-084 01840 A
Approvals
Input voltage
Output
voltage
Normal Duty
power rating
Date code
Serial
number
Input
frequency
No.of phases &
Typical input current for
Normal Duty rating
Normal Duty rating
output current
1710
No. of Input phase &
Input current
No. of Output phases
Output current
& Normal Duty Rating
Model
Input
frequency
Normal Duty
power rating
Date code
Approvals
Serial
number
Output
voltage
Input
voltage
H300
1710
Key to approvals
CE approval Europe
RCM regulatory
compliance mark
Australia
UL / cUL approval
USA &
Canada
RoHS compliant Europe
Functional safety
USA &
Canada
Eurasian conformity Eurasia
R
Large label*
NOTE