Nidec H300 - Mounting Brackets

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media Card
Operation
Building
Automation
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
HVAC Drive H300 47
Issue Number: 3
3.5.3 Mounting brackets
Table 3-2 Mounting brackets
* Surface mounting brackets are also used when through-panel mounting.
Frame size Surface mounting kit (supplied with drive) Qty Through-panel mounting kit (option) Qty
3
Outer hole size: 5.2 mm (0.20 in)
Centre hole / slot size: 6.2 mm (0.24 in)
x 2*
x 2
Hole size: 5.2 mm (0.21 in)
x 1
4 x 2*
x 2
Hole size: 5.2 mm (0.21 in)
x 1Hole size: 6.5 mm (0.26 in)
5 x 2*
x 2
Hole size: 5.2 mm (0.21 in)
Hole size: 6.5 mm (0.26 in) x 1
6 x 2*
x 3
Hole size: 5.2 mm (0.21 in)
Hole size: 6.5 mm (0.26 in) x 1
7 x 2*
x 2
Hole size: 9 mm (0.35 in)
Hole size: 9 mm (0.35 in) x 1
8 x 2*
x 6
Hole size: 5.5 mm (0.22 in)
Hole size: 9 mm (0.35 in) x 1
9A, 9E and
10E
x 2*
x 8
Hole size: 5.5 mm (0.22 in)
Hole size: 9 mm (0.35 in) x 1