Nidec H300 - Surface Mounting the Size 6 Drive; Surface Mounting the Size 7 Drive

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media Card
Operation
Building
Automation
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
36 HVAC Drive H300
Issue Number: 3
Figure 3-18 Surface mounting the size 6 drive
The outer holes in the mounting bracket are to be used for surface mounting. See Table 3-2 for further information.
Figure 3-19 Surface mounting the size 7 drive
378 mm
(14.88 in)
196.0 mm
(7.72 in)
6.0 mm
(0.24 in)
Æ7.0 mm
(0.27 in)
7.0 mm
(0.28 in)
227 mm (8.94 in)
210 mm (8.27 in)
391 mm
(15.39 in)
365 mm
14.37 in
NOTE
270 mm (10.63 in)
557 mm (21.93 in)
508 mm (20.0 in)
280 mm (11.02 in)
220 mm (8.66 in)
Æ 9mm (0.35 in)
538 mm (21.18)
25 mm
(0.98 in)
9.5 mm
(0.39 in)