Nidec H300 - Through Panel Mounting the Size 6 Drive; Through Panel Mounting the Size 7 Drive

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media Card
Operation
Building
Automation
Advanced
parameters
Technical
data
Diagnostics
UL listing
information
HVAC Drive H300 43
Issue Number: 3
Figure 3-27 Through panel mounting the size 6 drive
The outer holes plus the hole located in the center of the bracket are to be used for through panel mounting.
Figure 3-28 Through panel mounting the size 7 drive
227 mm (8.94)
131 mm (5.16 in)
412 mm (16.22 in)
210 mm (8.27 in)
96 mm (3.78 in)
365 mm (14.37 in)
356 mm (14.02 in)
196 mm (7.72 in)
Ø7.0 mm (0.27 in)
(x 6 holes)
98 mm (3.86 in)
203 mm (7.99 in)
98 mm (3.86 in)
399 mm (15.71)
264 mm (10.39 in)
21 mm (0.83 in)
167 mm (6.58 in)
Æ 5. mm2
(0.20 in)
(x 6 holes)
224 mm (8.82 in)
120 mm (4.73 in)
26 mm
(1.02)
358 mm (14.09 in)
26 mm
(1.02)
26 mm
(1.02)
112 mm
(4.41 in)
112 mm
(4.41 in)
NOTE
220 mm (8.66 in)
252 mm (9.92 in)
310 mm (12.20 in)
252 mm (9.92 in)
538 mm (21.18 in)
488 mm (19.21 in)
278 mm (10.95 in)
Æ 9mm (0.35 in)
330 mm (12.99 in)
270 mm (10.63 in)
245 mm (9.65 in)
188 mm (7.40 in)
508 mm (20.0 in)
92 mm (3.62 in)