ACCESS GATEWAY
186 System Administration
Name/Text – The name of the button and the mouse-over text. The mouse-over text is
the text that appears in the ICC’s Message Bar when your mouse pointer “rolls” over
a button image.
Target URL – Where subscribers are sent when they click on the button.
Image Name – The representative image file you want to use for the button.
When assigning images for buttons, refer to: “Pixel Sizes” on page 188.
When you have completed assigning all your redirect buttons, click on the Submit button to
save your changes, or click on the
Reset button if you want to reset all the values to their
previous state.
You can now assign the banners that you want to display to subscribers.
If you assign (or change) button images or banner images, the Access Gateway
must be rebooted for your changes to take effect.
To Next Page
Loading...
