Nordson Encore Customer Product Manual

Setup
4-2
Part 1602966−05
E 2015 Nordson Corporation
Feed Center Function Settings (contd)
Screen Function Description Default
SCREEN 4
HDLV Pump Purge
Pulse Cycle Rate
Sets the on/off cycle rate
for the reclaim and virgin
HDLV transfer pump purge
cycle. The purge cycle is
active while the pump
purge duration timer is
running.
0.25
seconds
SCREEN 5
HDLV Pump Purge
Duration
Sets the duration for the
reclaim and virgin HDLV
transfer pump purge cycle.
The purge cycle stops
when the duration timer
runs out.
45.00
seconds
SCREEN 6
Gun Purge Pulse “ON”
Duration
Gun Purge Pulse “OFF”
Duration
Gun Purge Duration Per
Bank
Sets the pulse duration of
the internal gun purge
during the gun purge cycle.
The cycle is active while
the gun purge duration
timer is running.
Sets the duration of the
delay between internal gun
purge pulses during the
gun purge cycle. The
cycle is active while the
gun purge duration timer is
running.
Sets the duration for the
purge cycle for each purge
bank. The purge cycle
stops when the duration
timer runs out.
0.50
seconds
1.30
seconds
45.00
seconds
SCREEN 7
Gun Purge Bank
Quantity
Configures the gun purge
bank quantity per system.
The maximum number of
gun purge banks is three.
2

Nordson Encore Specifications

General

Brand	Nordson
Model	Encore
Category	Paint Sprayer
Language	English