Nordson Encore - Fluidizing Latch Block Kits

Parts
9-7
Part 1602966−05
E 2015 Nordson Corporation
Fluidizing Latch Block Kits
See Figure 9-4. Use these kits to fluidize the powder around the lance
assembly. These kits are typically used with non-fluidized powder sources
such as boxes.
Item Part Description Quantity Note
1 1102803 Kit, fluidizing manifold, PFC 1
1A −−−−−−
S Connector, male, 6 mm tube x 1/4 BSPT
1
1B −−−−−−
S Nut, adapter, lance air tube
1
1C 941113
S O-ring, silicone, 0.424 in. ID x 0.103 in. wide
2
1D −−−−−−
S Nut, air passage blanking
1
1E −−−−−−
S Sleeve, locating, global PFC lance
2
2 1102804 Kit, fluidizing tube, PFC 1
2A 940142
S O-ring, silicone, 0.489 in. ID x 0.07 in. wide
4
2B −−−−−−
S Tube, fluidizing, stainless steel
2
1
1A
1E
1C
1E
1D
2A
2B
1B
1C
2
Figure 9-4 Fluidizing Latch Block Module Parts