Oki Pro1040 - Adjusting Density Manually

- 101 -
Adjusting Color with the Control Panel
4
Select [On], and then press the <OK>
button. Confirm there is a check mark
( ) to the left of [On].
5
Press the <ON LINE> button to return
to the standby screen.
Adjusting Density
Manually
The printer can implement compensation
periodically using auto density compensation
mode, but if the print density is noticeable, it
can also be compensated manually.
Memo
z
Density adjustment values are set by specifying [Cyan
Density], [Magenta Density], [Yellow Density], [Black
Density], and [White Density]* values with the control
panel.
*: This item available only on the Pro1050
1
Press the <Fn> key.
The numerical values input screen will
be displayed.
2
Press <3>, <0>, <0>, and press the
<OK> button.
3
Check that [Execute] has been selected,
and press the <OK> button.
4
Execute density adjustment.