Oki Pro1040 - Using IEEE802.1 X

- 179 -
Using a Web Browser to Configure the Network Setup
7
Select [Algorithm].
8
Enter the passphrase for encryption in
[Passphrase] for [Privacy (Encription)
Settings].
Memo
z
You can select [DES] only for the encryption
algorithm.
9
Click [Submit].
10
Settings are saved on the printer and
the network function is restarted.
Memo
z
For the context key of the SNMP manager to be used,
specify "v3context".
Using IEEE802.1X
Authentication is in accordance with IEEE802.1X.

IEEE802.1X Setup Flow
To configure IEEE802.1X settings on the printer,
first connect the printer and computer via a
normal hub for setup. After completing the
IEEE802.1X setting configuration procedure,
connect the printer to the authentication switch.
1
Connect the printer to a computer.
2
On the computer, specify an IP address
for setting up.
3
On the printer, specify an IP address for
setting up.
4
On the printer, configure IEEE802.1
settings.
5
Connect the printer to the
authentication switch.