Oki Pro1040 - Automatic IP Address Setting; Uninstalling the Utility

- 194 -
OKI LPR Utility
Automatic IP Address
Setting
You can have the server automatically search
for and reset IP addresses that were changed
when a printer’s power was turned on while it is
connected to the DHCP server.
Note
z
The search is performed in accordance with the search
scope of the OKI LPR Utility.
Memo
z
Enabled in the initial settings of the device.
1
On the [Option] menu, select [Setup].
2
Select the [Auto Reconnect] check box.
3
Click [OK].
Uninstalling the Utility
1
On the [File] menu, select [Exit].
2
Select [Start] > [Okidata] > [Uninstall
OKI LPR Utility] to start the Uninstall
OKI LPR Utility.
On the "User Account Control" dialog box
that appears, click [Yes].
3
Click [Yes].
This starts the delete operation.