Oki Pro1040 - Initializing Network Settings

- 124 -
Initializing Network Settings
⿟
Initializing Network Settings
Note
z
Implementing this operation will initialize all network
settings.
1
Press the scroll button or .
2
Select [Admin Setup], and then press
the <OK> button.
3
Enter the administrator password, and
then press the <OK> button.
Memo
z
The factory default setting of the administrator
password is [999999].
4
Select [Network Setup], and then press
the <OK> button.
5
Select [Network Factory Defaults], and
then press the <OK> button.
6
When [Execute] appears, press the
<OK> button.
7
Initialization is executed, and the
display returns to the standby screen.